SPECIFICATIONS

ENGINE

Model CUMMINS 6BT 5.9 TC
Type Water cooled, Turbo charged diesel engine
No. of Cylinders 6 inline
Bore/Stroke 102mm x 120 mm
Capacity 5883 cc
Max. Engine Output 93.5 kw ( 125.3 HP) at 2500 rpm
Max. Torque 410 Nm (41.8 mkg) at 1400-1700 rpm
Compression ratio 17.6 : 1
Firing Order 1-5-3-6-2-4
Air Filter Dry Type remote mounted
Oil Filter Spin-on full flow paper type
Fuel Filter Pre & fine filteration with water seperator
Fuel Injection Pump MICO "A" Type inline
Governor Built in centrifugal type
Turbo Charger HOLSET
Capacity of Cooling system -24 liters (total)
Coolant Water & Ethylene glycol, ratio 1:1 premixed
Crank case oil Max. 14.3 Litres
Capacity Min. 12.3 Litres
Weight of Engine 413 kg (Dry):With flywheel and alternator but without air compressor and starter
Radiator frontal area 2887 sq. cm.

CLUTCH

Type Single plate dry friction type
Outside diameter of clutch lining 310 mm
Type F & S make
Friction Area 1030 sq. cm. (approximately)

GEAR BOX

Model TATA GBS-40
No of gears 5 Forward and 1 Reverse
Gear ratios 1st
2nd 
3rd
– 7.51  
– 3.99
– 2.50
4th        
5th
Reverse
– I.51
– 1.00 
– 6.93

REAR AXLE

Model TATA RA - 108RR                   Single reduction hypoid gears, fully floating axle shafts
Ratio 5.857: 1 ( 41/7 ) Standard
5.8 75 1 ( 47/8 ) Optional

FRONT AXLE Heavy duty Forged I beam, Reverse Elliot type.
STEERING Mechanical steering for 36 & 42 Wheel-base
Power steering for 46 & 48 wheel base

BRAKES

Service Brake Fully duplicated, full air S-CAM brake system
Brake Drum diameter: 410 mm
Lining Area Front – 2180 sq. cm.
Rear – 2470 sq. cm.
Total – 4650 sq. cm.
Parking Brake Hand operated
Type Spring actuated parking brake acting on rear wheels
Engine Exhaust Brake: Pneumatically operated interlinked with service brake control

FRAME Ladder type heavy duty frame with rivetted/ bolted cross members.
Side members are of channel section.
Depth - 223 mm (max), Width - 60 mm

SUSPENSION
Type Semi elliptical leaf spring at front and rear
Spring Span Front - 1450 mm, Rear - 1600 mm
Leaf Width Front - 70 mm, Rear - 80 mm
Shock Absorbers Hydraulic double acting telescopic type at front only.

WHEELS & TYRES
Tyres 10.00 x 20 – 16 PR
Wheel Rims 7,00 x 20
No. of Wheels Front - 2, Rear - 4, Spare - 1

FUEL TANK
Capacity 150 litres rectangular tank for 3625 WB
160 litres round tank for 4225 WB
200 litres rough tank for 4565 WB & 4855 WB

CAB/COWL All steel semi – forward control Driver’s cab/cowl.

ELECTRICAL SYSTEMS

System voltage: 12 Volts
Alternator Capacity: 63 Amps
Battery 12 Volts, 180 Ah capacity

PERFORMANCE
Max. geared speed in top gear (With std. rear axle) 81 kmph
Max. climbing ability in 1st gear with standard gear box & rear axle 17%
WHEEL BASE (mm) 3625 4225 4565 4855
Minimum Turning Circle Dia. in (mm) as per IS: 9435 14500 16700 17800 18900
Minimum Turning Clearance Circle Dia. in (mm) as per IS: 9435 16000 18200 19300 20400

MAIN CHASSIS DIMENSIONS AS PER IS 9435 in (mm)

WHEELBASE 3625 4225 4565 4855
Track Front 1933 1933 1933 1933
Track Rear 1809 1809 1809 1809
Overall Length 6100 6970 7720 8325
Max. Width 2434 2434 2434 2434
Front Overhang 1185 1185 1185 1185

WEIGHTS (kg)

Tolerance as per INTEREUROPE StVZO
WHEEL BASE (MM): 3625 4225 4565 4855
Complete chassis kerb: 4150 weight with cab without loadbody (With spare wheel and tools as per IS 9211 4150 4205 4235 4275
Bare chassis kerb weight with cowl (With spare wheel and tools) as per IS 9211 3960 4015 4045 4085
Max. Permissible FAW 5460 5460 6000 6000
Max. Permissible RAW 10200 10200 10200 10200
Max. Permissible GVW 15660 15660 16200 16200

WARRANTY : Warranty details


CAUTION: Do not weld or drill 
Accessories shown in the picture or else where do not constitute standard fitment.

The specifications are subject to change without notice. Please contact our nearest office for latest specifications.

Data published herein is statistical and for information only, performance may vary with the conditions encountered.