|
|
SPECIFICATIONS
ENGINE
| Model | CUMMINS 6BT 5.9 TC |
| Type | Water cooled, Turbo charged diesel engine |
| No. of Cylinders | 6 inline |
| Bore/Stroke | 102mm x 120 mm |
| Capacity | 5883 cc |
| Max. Engine Output | 93.5 kw ( 125.3 HP) at 2500 rpm |
| Max. Torque | 410 Nm (41.8 mkg) at 1400-1700 rpm |
| Compression ratio | 17.6 : 1 |
| Firing Order | 1-5-3-6-2-4 |
| Air Filter | Dry Type remote mounted |
| Oil Filter | Spin-on full flow paper type |
| Fuel Filter | Pre & fine filteration with water seperator |
| Fuel Injection Pump | MICO "A" Type inline |
| Governor | Centrifugal type |
| Turbo Charger | HOLSET |
| Capacity of Cooling system | ~ 24 liters (total) |
| Coolant | Water and Ethylene glycol, ratio 1:1 premixed |
| Crank case oil | Max. 14.3 Litres |
| Capacity | Min. 12.3 Litres |
| Weight of Engine | 413 kg (Dry):With flywheel and alternator but without starter and air compressor. |
| Radiator frontal area | 2887 sq. cm. |
CLUTCH
| Type | Single plate dry friction type |
| Outside diameter of clutch lining | 310 mm |
| Type | F & S make |
| Friction Area | 1030 sq. cm. (approximately) |
GEAR BOX
| Model | TATA GBS-40 | |
| No of gears | 5 Forward and 1 Reverse | |
| Gear ratios | 1st – 7.51 2nd – 3.99 3rd – 2.50 |
4th – I.51 5th – 1.00 Reverse – 6.93 |
REAR AXLE
| Model | TATA RA - 108 RR Single reduction hypoid gears, fully floating axle shafts |
| Ratio | 5.857: 1 (41/7)
Standard 5.8 75 1 (47/8) Optional |
| FRONT AXLE | Heavy duty Forged I beam, Reverse Elliot type. |
| STEERING | Mechanical
steering Optional: Power steering |
BRAKES
| Service Brake | Fully duplicated, full air S-CAM brake system |
| Brake Drum diameter: | 410 mm |
| Lining Area | Front – 2180
sq. cm. Rear – 2470 sq. cm. Total – 4650 sq. cm. |
| Parking Brake | Hand operated |
| Type | Spring actuated parking brake acting on rear wheels |
| Engine Exhaust Brake: | Pneumatically operated interlinked with service brake |
| FRAME | Ladder type heavy
duty frame with rivetted/ bolted cross members. Side members are of channel section. Depth - 223 mm (max), Width - 60 mm |
| WHEELS & TYRES | |
| Tyres | 10.00 x 20 – 16 PR |
| Wheel Rims | 7,00 x 20 |
| No. of Wheels | Front - 2, Rear - 4, Spare - 1 |
| FUEL TANK | |
| Capacity | 150 litres rectangular tank |
| CAB/COWL | All steel semi – forward control Driver’s cab. |
ELECTRICAL SYSTEMS
| System voltage | 12 Volts |
| Alternator Capacity | 63 Amps |
| Battery | 12 Volts, 180 Ah capacity |
TIPPING GEAR
| Body Type | Underbody tipping gear pivoted to the subframe at rear with heavy duty steel body. Tipper is provided with tail gate. |
|||||
| Truck capacity in Cu. Mtrs | Single Ram | Twin Ram |
||||
| Scoop Tipper |
Box Tipper |
Coal Carrier |
Scoop Tipper |
Box Tipper |
Coal Carrier |
|
| 5 | 6 | 8 | 6 | 6 | 10 | |
HYDRAULIC SYSTEM
| Lifting Cylinders | Two stage double acting telescope cylinders - 1 No. for Single Ram, 2 No. for Twin Ram | |||||
| Temp model | APP, MK-II |
|||||
| Type | Axial Plunger |
|||||
| Single Ram | Twin Ram |
|||||
| Scoop Tipper |
Box Tipper |
Coal Carrier |
Scoop Tipper |
Box Tipper |
Coal Carrier |
|
| Hydraulic oil tank capacity in litres | 28 | 28 | 28 | 55 | 55 | 55 |
| Fuel system capacity in litres | 38 | 38 | 38 | 70 | 70 | 70 |
| Tipping time in sec. | 12 | 12 | 12 | 12 | 12 | 12 |
| Lowering time in sec (app.) | 7 | 7 | 7 | 7 | 7 | 7 |
| Control valve | MCV-90 | MCV-90 | MCV-90 | MCV-90 | MCV-90 | MCV-90 |
| Relief valve pressure setting in kg/sq.cm | 165 | 165 | 165 | 165 | 165 | 165 |
| Tipping angle in degrees (Approximately.) | 62 | 50 | 43 | 62 | 50 | 43 |
| SUSPENSION | |
| Type | Semi elliptical leaf spring at front and rear |
| Spring Span | Front - 1450 mm, Rear - 1600 mm |
| Leaf Width | Front - 70 mm, Rear - 80 mm |
| Shock Absorbers | Hydraulic double acting telescopic type at front only. |
| PERFORMANCE | |
| Max. geared speed in top gear (With std. rear axle) | 81 kmph |
| Max. climbing ability in 1st gear with standard gear box & rear axle | 17% |
| Wheel Base (mm) | 3625 |
| Minimum Turning Circle Dia. in (mm) as per IS: 9435 | 14500 |
| Minimum Turning Clearance Circle Dia. in (mm) as per IS: 9435 | 16000 |
MAIN CHASSIS DIMENSIONS AS PER IS 9435 in (mm)
| Single Ram | Twin Ram |
|||||
| Scoop Tipper |
Box Tipper |
Coal Carrier |
Scoop Tipper |
Box Tipper |
Coal Carrier |
|
| WHEELBASE | 3625 | 3625 | 3625 | 3625 | 3625 | 3625 |
| Track Front | 1933 | 1933 | 1933 | 1933 | 1933 | 1933 |
| Track Rear | 1809 | 1809 | 1809 | 1809 | 1809 | 1809 |
| Overall Length | 6100 | 6625 | 6625 | 6100 | 6625 | 6625 |
| Max. Width | 2434 | 2434 | 2434 | 2434 | 2434 | 2434 |
| Front Overhang | 1185 | 1185 | 1185 | 1185 | 1185 | 1185 |
WEIGHTS (kg)
Tolerance as per INTEREUROPE StVZO |
||||||
| Single Ram | Twin Ram |
|||||
| Scoop Tipper |
Box Tipper |
Coal Carrier |
Scoop Tipper |
Box Tipper |
Coal Carrier |
|
| WHEELBASE(mm) | 3625 | 3625 | 3625 | 3625 | 3625 | 3625 |
| Chassis ready for operation with cab & tipper body ULW (asper IS 9211 with spare wheel & tools) | 6050 | 5810 | 5990 | 6540 | 5840 | 6020 |
| Max. Permissible FAW: | 5460 | 5460 | 5460 | 5460 | 5460 | 5460 |
| Max. Permissible RAW: | 10200 | 10200 | 10200 | 10200 | 10200 | 10200 |
| Max. Permissible GVW: | 15660 | 15660 | 15660 | 15660 | 15660 | 15660 |
WARRANTY : Warranty details
CAUTION:
Do not weld or drill
Accessories shown in the picture or else where do not constitute standard fitment.
The specifications are subject to
change without notice. Please contact our nearest office for latest specifications.
Data published herein is statistical and for information only, performance may vary with
the conditions encountered.